MAX20097AUI/V+ Analog Devices / Maxim Integrated

說明：

LED照明驅動器IC Dual Channel High Voltage Synchronous BU

送貨限制:

Mouser目前不在您的地區出售本產品。

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

商品屬性	屬性值	選擇屬性
製造商:	Analog Devices Inc.
產品類型:	LED照明驅動器IC
送貨限制:	Mouser目前不在您的地區出售本產品。
RoHS:
輸出數:	2 Output
拓撲學:	Buck
輸出電流:	30 A
封裝/外殼:	TSSOP-EP-28
電源電壓 - 最大值:	60 V
電源電壓 - 最小值:	4.5 V
操作頻率:	1 MHz
輸出電壓:	Adjustable
系列:	MAX20097
最低工作溫度:	- 40 C
最高工作溫度:	+ 125 C
特徵:	PWM Dimming, Short Circuit and Thermal Protection
資格:	AEC-Q100
封裝:	Tube
品牌:	Analog Devices / Maxim Integrated
組裝國家:	Not Available
擴散國:	Not Available
原產國:	TH
開發套件:	MAX20097EVKIT
調光:	With Dimming
用於:	Automotive Exterior Lighting, Commercial, Industrial and Architectural Lighting
輸入電壓:	4.5 V to 60 V
安裝風格:	SMD/SMT
通道數:	2 Channel
產品:	LED Drivers
產品類型:	LED Lighting Drivers
原廠包裝數量:	50
子類別:	Driver ICs
電源電流 - 最大值:	10 mA
類型:	High Brightness LED Controller
每件重量:	510.459 mg

找到產品:

若要顯示類似商品，請選取至少一個核選方塊

至少選中以上一個核取方塊以顯示在此類別中類似的產品。

所選屬性: 0

篩選文檔:

規格書

MAX20097AUI/V+ 規格書

RoHS Certificate (PDF)

CAHTS:: 8542390000
USHTS:: 8542390090
TARIC:: 8542399000
MXHTS:: 8542399999
ECCN:: EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

MAX20096/MAX20097 High-Brightness LED Controllers

Analog Devices MAX20096/MAX20097 High-Brightness LED Controllers are dual-channel, high-voltage, synchronous N-channel high-current buck LED drivers. The MAX20096/MAX20097 LED Controllers use a proprietary average current-mode-control scheme to regulate the inductor current. Maintaining a nearly constant switching frequency, the control method does not require any control-loop compensation.