T530Y477M006ATE005

KEMET
80-T530Y477M6ATE5
T530Y477M006ATE005

製造商：

說明：
鉭電容器 - 聚合物 6.3 VDC 470uF 2917 20% ESR=5mOhm
檢視K-SIM中的模擬和SPICE型號

規格書:
ECAD模型:
下載免費的庫載入器，為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。
更多資訊
瞭解更多關於KEMET T530Y477M006ATE005的資訊

庫存量: 2,818

庫存：
2,818
可立即送貨
在途量:
4,500
工廠前置作業時間：
25
週 工廠預計生產時間數量大於所顯示的數量。
最少： 1   多個： 1
單價:
HK$-.--
總價:
HK$-.--
估計關稅:
包裝:
完整捲（訂購多個500）

Pricing (HKD)

數量 單價
總價
零卷 / MouseReel™ †
HK$65.92 HK$65.92
HK$51.05 HK$510.50
HK$44.22 HK$2,211.00
HK$42.09 HK$4,209.00
完整捲（訂購多個500）
HK$42.00 HK$21,000.00
5,000 報價
† HK$55.00 MouseReel™費用將加入您的購物車內並自動計算。所有MouseReel™訂單均不能取消和不能退換。 ↩

商品屬性 屬性值 選擇屬性
KEMET
產品類型: 鉭電容器 - 聚合物
RoHS:  
470 uF
6.3 VDC
SMD/SMT
20 %
2917
5 mOhms
296.1 uA
3.8 mm
- 55 C
+ 125 C
7343
Y Case
T530
Reel
Cut Tape
MouseReel
品牌: KEMET
組裝國家: Not Available
擴散國: Not Available
原產國: CN
損耗因數DF: 8
長度: 7.3 mm
濕度敏感: Yes
產品: Tantalum Organic Polymer Low ESR
產品類型: Tantalum Capacitors
紋波電流: 7.3 A
原廠包裝數量: 500
子類別: Capacitors
公司名稱: KO-CAP
類型: High Capacitance/Low ESR Polymer Electrolytic Capacitor
寬度: 4.3 mm
每件重量: 600 mg
找到產品:
若要顯示類似商品，請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0 

                        
KEMET Suzhou Plant has evaluated and qualified the new black
epoxy material setting and will start the conversion from yellow
to black. This conversion allows KEMET to be consistent and
standardize with industry and minimize the future risk of
potential raw material cost escalation/availability related to
usage of yellow epoxy in specialized industries.

This change is planned for implementation to begin 1st week,
February 2014. Both yellow and black epoxy material will be
shipped until all finished goods inventory of yellow material is
depleted. No changes in the part number will be implemented.


Please contact a Mouser Technical Sales Representative for
further information.

5-0813-18

CNHTS:
8532211000
TARIC:
8532210000
CAHTS:
8532210010
USHTS:
8532210050
JPHTS:
853221000
KRHTS:
8532210000
MXHTS:
8532210100
BRHTS:
85322119
ECCN:
EAR99

KEMET T530系列高電容KO-CAP

KEMET T530系列聚合物電容器為高電容、高效能的有機電容器 (KO-CAP)。T530系列聚合物KO-CAP提供了與T520系列相同的優勢，但具備更高的電容值 (150µF-1500µF)、更高的漣波電流處理能力、更低的ESR範圍（4mΩ至40mΩ），最高作業溫度為125°C。T530系列電容器採用多陽極結構，可減少訊號需要穿透的深度，使其具有比任何其他表面黏著型電容器都還要高的電容值和最低的ESR。KEMET擴充了T530高電容KO-CAP系列，為其提升價值。

MLCC Replacement Solutions

KEMET KOCAP Tantalum Polymer Capacitors are ideal for board space savings, a piezo noise-free environment, high capacitance, long stable life performance, and/or lower profile requirements. Tantalum polymer capacitors are selected over other capacitor technologies when application voltages are less than 50V, capacitance needs are between 1µF to 1mF, and application frequencies are below 1MHz. Since replacing ceramic capacitors with tantalum polymer capacitors is not typically one-for-one, designers need to consider several design requirements as outlined in the schematic below.

Polymer Capacitors Industrial Segment

KEMET Organic Capacitors (KO-CAP®) offer higher voltages in smaller case sizes and are ideal for industrial applications. These capacitors deliver a solution for applications requiring power-loss protection or maximum power efficiency of a circuit when board space is limited. The polymer technology provides these capacitors with extended life capabilities in applications subject to extremely harsh environments. 

Group Switch Tank Converter Products

YAGEO Group (KEMET, YAGEO, Pulse) Switch Tank Converter (STC) Products are high-efficiency, high-density converters designed for non-isolated DC-DC applications. These devices operate by replacing the large magnetics typically used in converter designs with stacking voltages using switches and capacitors. The STC products are strategically placed between the input and DC-DC converter stages of the YAGEO group's Digital Architecture Passive Components. As a solution, these STC products take advantage of advanced semiconductor technology to support power supplies.

Group Input Stage Solutions

YAGEO Group (KEMET, YAGEO, Pulse) offers inductors, capacitors, and TVS diodes with a large variety of form factors and specifications. In a digital system, the input stage is the first step in ensuring data integrity, circuit efficiency, and safety protections. This is typically achieved with an inductor, capacitor, and a TVS diode for low-voltage systems.

Group DC-DC Converters

YAGEO Group (YAGEO, KEMET, Pulse) strives to support 90% of all the passive technologies required in circuit designs. DC-DC converters saturate the electronics industry and are used to either step or step down the voltage and current requirements of the next stage in the circuit. In every variation of the DC-DC converter, current sense resistors, diodes, inductors, precision voltage resistors, and capacitors are used.

Tantalum Polymer Capacitors

KEMET Tantalum Polymer Capacitors are specially designed as a capacitance solution for applications seeking low ESR, high capacitance, long life, small case size, low profile, and high ripple handling. The use of a solid electrolytic capacitor in combination with a conductive polymer cathode yields the most energy-dense capacitance solution available in the world with the lowest possible ESR.

發生意外的錯誤。


有問題嗎？ 請瀏覽幫助中心。
有關特定訂單的問題，請登入您的帳戶。

如有其他問題，請致電800-346-6873或發送郵件至 help@mouser.com 與我們聯絡。