SN75LVPE3410RNQR

Texas Instruments
595-SN75LVPE3410RNQR
SN75LVPE3410RNQR

製造商:

說明:
介面 - 訊號暫存緩衝器,中繼器 PCIe 3.0 8-Gbps 4-C hannel Linear Redriv

ECAD模型:
下載免費的庫載入器,為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。
此產品可能需要額外文件才能出口至美國境外。

供貨情況

庫存:
暫無庫存
工廠前置作業時間:
18 週 工廠預計生產時間。
最少: 3000   多個: 3000
單價:
HK$-.--
總價:
HK$-.--
估計關稅:
此產品免費航運

Pricing (HKD)

數量 單價
總價
完整捲(訂購多個3000)
HK$31.65 HK$94,950.00

商品屬性 屬性值 選擇屬性
Texas Instruments
產品類型: 介面 - 訊號暫存緩衝器,中繼器
送貨提醒:
 此產品可能需要額外文件才能出口至美國境外。
RoHS:  
Redrivers
I2C
90 ps
400 kHz
3.6 V
3 V
0 C
+ 70 C
SMD/SMT
WQFN-40
Reel
品牌: Texas Instruments
Ciss - 輸入電容: 1.5 pF
組裝國家: Not Available
擴散國: Not Available
原產國: Not Available
數據率: 8 Gb/s
通道數: 4 Channel
運作供電電流: 150 mA
產品類型: Signal Buffers, Repeaters
系列: SN75LVPE3410
原廠包裝數量: 3000
子類別: Interface ICs
公司名稱: PCIe
找到產品:
若要顯示類似商品,請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

此功能需要啟用JavaScript。

USHTS:
8542390090
MXHTS:
8542399999
ECCN:
3A001.A.2.A

SN75LVPE3410 Four-Channel Linear Redriver

Texas Instruments SN75LVPE3410 Four-Channel Linear Redriver is a low-power, high-performance linear repeater or redriver designed to support PCI Express (PCIe™) Generation 1.0, 2.0, and 3.0. The SN75LVPE3410 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. A linear output driver follows the CTLE receiver. The linear datapaths of Texas Instruments SN75LVPE3410 preserve the transmit preset signal characteristics. The linear redriver becomes part of the passive channel that, as a whole, gets link trained for the excellent transmit and receive equalization settings. This transparency in the link training protocol results in a tremendous electrical link and the lowest possible latency. The programmable equalization of the device, along with its linear datapaths, maximizes the flexibility of physical placement within the interconnect channel and improves overall channel performance. The programmable settings can be applied easily through software (SMBus or I2C) or by using pin control.